In this article, we are sharing with you all How to Load a Porter Cable Nail Gun. Nails and Hammers have been many helpful to us all at some point of our lives. They make a huge contribution to many day-to-day activates and DIY projects. But how long will you be using the traditional hammer to get things done?

It is time to shift to the better technological alternative of hammers – Nail Gun. With hammers, there is always a risk of ruining the work you are doing but Nail guns prove the be a great help with the exact aim of the nails on the project.

But just as it goes with any other machine, using a nail gun would require some prior idea of how the nail gun works so as to use it to its fullest efficiency. Here we will be talking about the Porter Cable Nail Gun.

A Porter Cable Nail Gun comes with 2 types of finish nail services. With this gun, the general nail size is 2-1/2 inches and over 16 Gauge. So here is a detailed article on how to load a porter cable nail gun.

How to Load a Porter Cable Nail Gun

Given here is a detailed step-by-step guide on loading porter cable nail gun. Make sure that you follow all the given steps and in the exact given chronological order. With this short guide, you will be able to load your gun with utmost ease and quickly.

Step 1: Safety

It goes without saying – safety first! It is always better to take a precaution than a cure. Wear all the safety equipment for a smoother process further. Also, try keeping the gun empty as there could be a chance of firing in case the nails rotate during the driving mechanism’s connection. We would advise you to refrain from loading nails into the gun before you connect as this can be very risky.

Set Up the Nail and Magazine

Begin with observing your nail gun and the different parts of it. The porter cable nail gun has a clip for loading. You will see that the sleeve which has been attached to the nail gun is pointing towards the barrel. In many nail guns, there is also a sleeve at the corner which is meant to help you in setting the goals.

If you wish to fit the nail gun in the most appropriate way, then you will have to find the right clip. Now see that the trigger of the nail gun is active. Also, see that the nail gun is totally unobstructed and there is no magazine in the gun.

Step 2: Maintain Gun and Handle Compatibility

Now you will have to maintain compatibility in the Handle and Gun. For this, place the clip in line with the sleeve of the gun. This will check any difficulty in tilting the head of the nail to the gun’s back.

Do not forget to see that the nails you are using are suitable for running parallel to the gun barrel. When you are loading,  just keep the nose of the nail gun away at a safe distance from yourself. This applies to others around you too.

Step 3: Load the Nails

Now comes the point where you will be sliding the T-Shaped clip on the back of the nail corner using the groove under the sleeve. Note that if the magazine of the nail gun is empty before you load the first clip then you can place the second clip behind the first one.

Now press the nail gun in the upward direction and hold the clip in its position while doing so. Make sure to not pull the trigger until it is pressed fully against the surface.

You need to be of utmost care while loading the nails to avoid many mishaps. And DO NOT keep your finger in such a way that it comes in contact with the trigger.

Step 4: Maintain Spring-Clip Alignment

Now pull the pusher which comes with the magazine to the back of the magazine. The spring can push 2 clips of the nail forward. Now, you press the button on the spring which is with the sleeve.

The nails have to be slide forward through the side sleeves. Also, when you have loaded the porter cable nail gun, you will have to store it in the right way. At the same time, make sure that the nails of the gun-free from the jam. In case of a jam, you will not be able to use the nail gun efficiently.

Step 5: Unload & Check the Magazine

You will have to pull the spring-loaded slide on the back of the nail gun for removing the rest of the nails. Make sure that you have emptied the nail gun before you save it after finishing your work.

Also, unlock the slide after putting the nails in their position for confirmation. After that, press the spring which is in the firing mechanism using the nails in your gun!

Read More: How Does a Pneumatic Nail Gun Work?

FAQs

Can you use pin nails in a brad nailer?

There is a huge difference in the sizes of brad nailer and pin nails. The former is large and thus ideal for using 16 Gauge nails. However, the pin nails are small and thus suitable to use with 23 gauge nails. So using these two interchangeably will not be as efficient.

Why doesn’t my nail gun work?

Your nail gun might not be working or firing nails if there is a jam in your nail gun. See that your nails are all in place to make your nail gun work well.

Can I use a pin nailer for a trim?

Absolutely, you can use a pain nail for trimming in any small projects or light work.

Concluding Words

I hope you have all found the above article on How to Load a Porter Cable Nail Gun of use. In case you have any questions or suggestions, then feel free to let us know in the comment section below. We will get back to you as soon as possible!

Keep visiting for more such helpful articles!